

CATALOGUE (527KB)
For more information including noise data and precise selection tables please contact MP&E Services.
![]() |
Structure Feature Fan Cross Flow Configuration design provides easier and safer installation and minimize the maintenance cost. Horizontal Discharge arrangement requires lower headroom and is suitable for indoor installation. |
Performance Guarantee The thermal performance is certified by CTI in accordance with STD-201. Drift loss rate is less than 0.001% of circulating water flow rate according to AS 4180 standard. |
|
![]() |
High Efficiency Axial Fan Aerofoil shaped hollow blades are made from Aluminum extrusion alloy and pitch angles are adjustable allowing optimization of the tower performance. High efficient and light in weight ensure low power consumption. |
![]() |
Belt Driven Transmission Motors are TEFC type with IP55 protection, Class F insulation and 1.15 service factor. Fans are driven by Vee belts with low tip speed, thus minimizing vibration and ensuring low noise. |
![]() |
3 in 1 Filler Fillers are vacuum formed of 0.4mm thick PVC film. Filler sheet configuration incorporate sloped flutes in both air intake and outlet sections and high efficient wet deck media section. The wet deck media section with continuous triangular pattern design provides high efficient heat transfer. |
![]() |
Water Distribution System Open gravity flow water distribution basin with removable covers is designed for non-clogging operation and prevents the growth of algae. Special design diffusion decks provide 100% guarantee for full coverage of filler by small droplets. |
![]() |
RDE-100 Drift Eliminator (Optional) 3 passes drift eliminator made of 0.4mm thick PVC sheet and placed in front of the outlet section of filler provides further reduction of drift loss rate to 0.001% of circulating water flow |
Unit 5, 42-44 Garden Blvd
Dingley Victoria 3172 Australia
Tel. (+61 3) 9551 4216
Fax. (+61 3) 9551 4242
